Yanke ruwan wukake kamar na ruwa a tsakanin duk ruwan wukar da ke wurin. Idan kuna duban sanda mai kauri ko bututu, akwai ruwa guda ɗaya kawai tare da ƙwanƙwasawa don fuskantar ta, sara ruwan wuƙa. Waɗannan sun dogara kaɗan akan kaifinsa masu kaifi kuma mafi yawa akan kaurin sa. Yana lalata kayan aikin don yanke shi guntu -guntu.
Tare da samfura da yawa suna ba da alƙawarin babban inganci a farashi daban -daban, ba duk samfuran ke ba da ingancin iri ɗaya ba. Don magance matsalar an zaɓi wasu mafi kyawun samfuran don yin kowane dinari da kuka kashe. Shiga cikin labarin kuma nemo mafi kyawun saraƙƙarfan sara da ke biyan bukatun ku.
A cikin wannan sakon za mu rufe:
- Jagorar siyan Saw Blade
- An yi bitar Mafi Kyawun Tsinke Sara
- FAQ
- Menene ruwan wuka ya sa yanke mafi laushi?
- Shin karin hakora a kan ruwa da kyau ya fi kyau?
- Hakora nawa ne ya kamata rawanin rawanin rawanin ya gani?
- Shin ruwan wukake na Diablo yana da ƙima?
- Za a iya tsagewa da ruwan giciye?
- Shin zaku iya amfani da kowane ruwa tare da SawStop?
- Yaya kauri na ƙarfe zai iya yanke Sawzall?
- Shin Sawzall zai iya yanke ƙarfe mai tauri?
- Ta yaya zan zabi ruwan wukake mai juyawa?
- Menene adadin hakoran da ke kan mashin saw?
- Har yaushe ya kamata dillali ya ga ruwa ya daɗe?
- Shin tebur na gani da miter sun ga ruwan wukake iri ɗaya?
- Shin TCT na iya yanke katako?
- Final Words
Jagorar siyan Saw Blade
Siyan wani abu wanda ba zai dace da buƙatun ku ba asarar kuɗi ne. Ana ba da cikakkun bayanai da yawa don samfuran daban -daban. Don fahimtar sigogi na tsinken tsinke sara kuna buƙatar sanin abubuwan ciki. Don haka shiga cikin sharuɗɗan kuma za ku koyi wane samfurin ya fi dacewa da ku kuma ku sa pennyworth ɗin ku.
size
Maganar girma ba ta da mahimmanci ba a amfani da ita ba dangane da sara. Ƙananan ƙarami zai ba da kyakkyawan ƙarewar ƙasa yayin da babba zai taimaka a cikin yanke mai zurfi. Hakanan, manyan fayafai suna da ƙarancin rayuwa gaba ɗaya.
Arbor
Arbor yana nufin ramin ma'anar lamba tare da kayan aikin yanke. Diamita na al'ada shine inch 1 wanda ya dace da kusan duk abin da aka saba amfani dashi sara inji inji. Ga na musamman, ya kamata a san siga na arbor kafin siyan ruwa.
Weight
Ƙarin nauyi yana rinjayar da yawa akan amfani da wutar mai yankan. Amma kuma don yanke manyan ƙarfe kamar aluminium, ƙarfe da sauran ƙarfe masu ƙarfe masu nauyi kamar fam 15 ko sama da haka ana ba da shawarar. Matsalar nauyi mafi girma tana ma'amala da ƙarancin ƙarewar ƙasa.
kauri
Kauri yana da mahimmanci don yanke faɗin. Kauri mai kauri yana aiki da kyau don yanke karafa kamar tubali ko ƙira. Ƙananan ƙananan za su yi kyau mafi kyawun kammalawa don kayan laushi. Babban kauri kuma yana ƙara girgiza yayin yanke. Ba kamar band ya gani, sara saws ba su da babban tashar aiki amma tana ma'amala da katako
core
Core yana ba da ikon tushe na ruwa. Ƙarfi mai ƙarfi yana ba da yanke sassauƙa da ƙaramin girgiza yayin yankewa. Don ƙananan ƙarfe sara sara ruwan wukake amfani da wuya karfe tsakiya da sosai m aluminum oxide hatsi da ake amfani da wuya karfe yankan.
Materials
Daban -daban nau'ikan wukaken wuka na sara suna amfani da abubuwa daban -daban. Ana amfani da hatsi na ƙarfe mai ƙarfi na ƙarfe kamar yadda yake ba da babban taro tare da iko. Don karafa masu taushi, ramin katon lu'u-lu'u tare da murfin ƙarfe yana aiki mafi kyau.
MaxPPP
Damuwa matsala ce yayin yankewa. Yayin yankewa tare da saurin gudu, ruwan ya sha wahala fiye da haka. Kamar yadda ake sa ran yanke babban sauri koyaushe, ana tsammanin RPM na 4300 ko sama da haka don matsakaicin sara sara. Ƙarfin ruwa mai ƙarfi yawanci yana da RPM mafi girma.
karko
Doreability don matsakaicin amfani yana nufin tsawon lokacin da mutum zai iya amfani da sara sara. Wannan siginar ta bambanta a amfani da kayan gini. Kullum yana da kyau ku tafi don dorewar dorewa don kayan aikin kuɗi. Hakanan, bin sha'anin oxide da tasirin aiki a cikin yanayi daban -daban zai taimaka wajen zaɓar mafi kyawun ruwa.
grit
Grit siginar siginar ce wacce ke nuna tsarkin jikin ruwa. Mafi girman grit, mafi ƙarfi da santsi yana yankewa. An ba da shawarar grit na 24 ko sama don yanke katako mai ƙarfi.
.Arfafawa
Wannan kuma yana samar da nau'in kayan haɗin aminci kuma yana taurare ruwan sara. A bisa al'ada ana ƙarfafa tsinken sara tare da zanen gilashin fiber guda biyu waɗanda ke taimakawa riƙe madaidaicin duka ɗaya kuma idan ruwan ya lalace kaɗan kaɗan ya faɗi.
Yankan Angled
Yankan kusurwa shine don yankewa tare da takamaiman son zuciya. Wannan fasalin yana buƙatar gefen ƙarfi mai ƙarfi tare da saurin yankan ƙarfi kamar yadda gogewar da aka ƙera ta yi ƙasa. Wannan fasalin yana taimakawa wajen yin nutsewa ko yanke kusurwa don ƙirƙirar ƙarin gefen.
Abubuwan gefen
Kullum gefuna suna da yanayi mai santsi tare da farfajiyar farfajiya don yanke ruwan wukake waɗanda aka yi da hatsin oxide na aluminium. Don gefunan lu'u -lu'u, guda lu'u -lu'u suna nan a gefen ruwan wanda ke amfani da shi azaman babban abin yanka. Wannan gefen lu'u -lu'u yana aiki mai girma don yanke ƙarfe mai laushi tare da ƙarewar ƙasa mai laushi. Yayin da ɗayan ke hulɗar da ƙaƙƙarfan ƙarfi da ƙarfe mai ƙarfi.
An yi bitar Mafi Kyawun Tsinke Sara
Za a iya yaudare ku cikin sauƙi kamar yadda tsinken sara samfur ne mai wahalar ƙima shi kaɗai. Yawancin masana'antun suna fitar da samfura daban -daban tare da ƙira da kaddarori daban -daban. Dangane da bincike da bita na masu amfani an bayyana mafi kyawun samfuran a ƙasa don taimakawa dalilin ku.
1. DEWALT DW8001 General Purpose Cho Saw Saw Wheel
amfanin
Nauyin kilo 1.2 kawai tare da ƙima mai kyau wannan ruwan yana da kyau ga duk matsakaitan injinan yankan kamar yadda yake da ƙarancin wutar lantarki. Duk wani kayan aiki na matsakaici ko na’ura na iya amfani da wannan tsinken sara don samun arbor 1-inch. A saboda waɗannan dalilai, wannan ruwa na iya taimaka wa buƙatun ku na yau da kullun waɗanda suka kama daga bututun PVC na 4 inch, sandar zaren B7, 5/8 rebar zuwa thick inch kauri sandar ƙarfe.
Ana amfani da hatsin oxide na aluminium don ƙirƙirar jikin ruwa wanda yake haske amma a lokaci guda, wannan kayan yana da ƙarfi kazalika yana ɗaukar dorewa. Galibi, wannan samfurin don dalilai ne na yanke ƙarfe. Don haka, don dacewa da abubuwan buƙatu akwai cakuda kayan abu wanda ke goyan bayan dorewar sa.
Kauri na 7/64-inch yana ba da damar yanke sassauƙa kuma baya ƙyale gefuna masu kauri. Yankan da tashin hankali yana yiwuwa saboda jikin ruwan yana da hatsi mai yawa. Don matakan aminci, an ƙara cikakkun fakitin gilashi 2. Ana iya yin mafi girman saurin sauri na 4300 RPM tare da wannan samfurin.
disadvantages
Kasancewar kayan aikin ƙarfe ne, ƙoƙarin yin katako da sauran abubuwa ba zai yi kyau ba. A sakamakon haka, an yi muku wahayi da cewa kada ku yi amfani da wannan tsinken mashin a kan tubalin ko laminate bene.
2. DEWALT Yankan Keken Dankali don Yanke Saw, Yankan Karfe
amfanin
Siffofin wannan tsinken tsinken sara yana da kyau iri ɗaya da na baya wanda ya haɗa da maƙerin. Yana auna kilo 2.5 kuma shine mai yanke baƙin ƙarfe wanda yake da kyau don la'akari da ƙarancin wutar lantarki. Kamar yadda sunan ya nuna, yana da kyau don yanke karafa waɗanda ake amfani da su a cikin tsarin gida ya haɗa da aluminium da ƙarfe daban -daban.
Wannan katako na sara yana amfani da oxide na aluminium don jikin ruwan. Wani fasali na musamman da zai bambanta wannan ruwan daga wanda ya gabata shine yazo tare da grit na 24. Wanda ke sa ya fi wahala kuma ya fi dacewa da yanke baƙin ƙarfe. Arbor duka 1 inch yayi daidai da duk masu yanke ƙarfe na gida na yau da kullun. Ana yin yankan tare da babban gudu kamar na baya har zuwa 4300 RPM.
Kauri na inci 7/64 yana ba da kyakkyawan ƙarewar ƙasa yayin yanke. Wannan tsinken sara yana ba da tsawon rai yayin da yake samar da kayan haɗin gwiwa. Don aminci, ana bayar da cikakkun faifan gilashi guda biyu don kariyar ƙarfafawa sau biyu.
disadvantages
Ba zai iya shiga a fili miter saw. Don keɓancewa ga kayan ƙarfe kawai, karafa masu laushi ba za su iya kammalawa ba kamar yadda aka samar da ƙarfi.
3. DEWALT DW8500 14-Inch ta 1-Inch Diamond Edge Chop Saw Blade
amfanin
Nauyin fam 3.42 da girman da ke nuna ikon aiki mai nauyi. Gina wannan samfur ɗin yana da tauri sosai saboda ya haɗa da gindin ruwa na ƙarfe da gefen lu'u -lu'u inda ake amfani da brazing don ƙirƙirar gefen lu'u -lu'u. Samfura daban-daban kamar kankare, filastik, fiberglass, roba, ƙarfe mara ƙarfe, bakin ƙarfe da ƙarfe za a iya yanke su cikin sauƙi tare da wannan ruwa.
Kamar yadda wannan tsinken yana amfani da gefunan lu'u -lu'u don yankewa ba ɓangaren ɓarna ba, kowane gefen lu'u -lu'u yana da ƙarfi. Don haka, ba tare da raguwar aikin ba, ana iya yanke yankewa cikin sauri. An yarda Max RPM na 4300. An san wannan samfur tsawon rayuwarsa sau 100 na naƙasa na sara sara wanda zai taimaka maka da dogon sabis.
Kasancewa da ƙaramin diamita na inci 3/32 tare da gaskiyar cewa tana amfani da zurfin zurfin yankan tare da gefunan lu'u -lu'u kawai waɗanda ke aiki azaman kayan yankan, wannan tsinken mashin ɗin na iya yanke daidai da ƙarewar ƙasa mai laushi. 1 inch na arbor diamita don dacewa a yawancin injin tsinke sara. Don ƙayyadaddun bayanai, wannan ruwa yana aiki sosai akan kayan laushi yayin da yake kula da zurfin yankewa akai -akai.
disadvantages
Kodayake yana da fa'idar yankan ƙarfe iri -iri, don ƙaramin bakin ciki da ikon iya yankewa tare da gefuna yana nufin ƙarfe mai ƙarfi wannan tsinken sara yana da rauni kuma yana iya wargajewa don amfani mai tsawo.
4. 14 x 1/8 x 1 Yanke Rawanin Yankan Abun Kaya Mai Ruwa - Kunshin 10
amfanin
Kasancewa da nauyi mai nauyi wannan guntun guntuwar sa an yi shi ne don yankewa mai ƙarfi. Jikin wannan tsinken tsinken an yi shi ne da aluminium oxide abrasive hatsi amma yana da tauri da maida hankali fiye da na baya. Duk da yake ana ba da babban iko, yanke ƙananan ƙarfe kamar ƙarfe, aluminium, da sauran ƙarfe na ƙarfe shine ƙwarewa ga wannan ruwa.
A kauri daga 1/8 inch yana nufin mafi girma ikon yanke. Ana samun babban yankewar RPM na 4300. Bugu da ƙari, wannan motar da aka sara ta zo tare da grit na 30 wanda ke tabbatar da yankewa da sauri da tsabta. Ana samun yanke kusurwa don ƙarfe wanda ke ba da yawa. Yana aiki da kyau a cikin injin tsinken tsinke.
Samfurin kuma yana tabbatar da babban rayuwa har sau 3 fiye da yadda ake sara raƙuman ruwa na al'ada. Wanda aka yi ta kaddarorin haɗin gwiwa na ƙarfafa resinous. Hakanan, gilashin gilashi biyu yana rufe ruwa don ƙarin ƙari ga aminci da dorewa.
disadvantages
Kodayake ana ba da ƙarfin zalunci, ya zo tare da farashin ƙaramin ƙasa. Ƙari ga wannan, ruwan ba shi da kyau don yanke karafa masu taushi.
5. Masana'antu na Mercer 603020 Sarauniyar Yankan Kaya
amfanin
Kilo 15.25 cikin nauyi tare da sikelin da ya dace da wannan katako na katako an yi shi ne don yanke nauyi. Fasaha ta musamman da wannan samfurin ke kawowa ita ce tana aiki don injinan sara da sara. Ruwa yana da jiki da aka yi da aluminum oxide. Wannan samfurin yana da kyau don yankan ƙarfe, rebar, bututun ƙarfe, kayan mashaya, da bututun ƙarfe.
Aluminum oxide hatsi wanda ake amfani da shi yana da matuƙar tauri. Ƙirƙiri ƙaramin ƙarfi an ƙirƙira shi tare da wannan giyar da aka sara. Bugu da ƙari, wannan samfurin yana ba da mafi girman saurin yanke duka wanda shine kusan 4400 RPM. Kauri 7/64-inch yana nan don yankewa mai laushi.
An ƙarfafa tsakiyar ruwa don aminci. Arbor ƙarfe ne wanda aka ƙarfafa don rage girgiza da mafi kyawun riko da injin sara. Don ƙayyadaddun abubuwan da ke sama, wannan samfurin na iya yankewa ba tare da burrs ba kuma yana tabbatar da kyakkyawan ƙarewar ƙasa. Gabaɗaya, wannan samfurin yana da kyau don dalilai na gaba ɗaya na yanke.
disadvantages
Kamar sauran masu yanke ƙarfe, ba su da kyau ga karafa masu taushi kuma ba su da kyau ga ƙarfe masu ƙarfi. Hakanan bai dace da injin yankan tsit ba.
FAQ
Ga wasu tambayoyin da akai akai akai da amsoshin su.
- Up zuwa $ 25
- $ 25 - $ 80
- Sama da $ 80
- Metal
- Mishi
- Itace
- kankare
- Plastics
Menene ruwan wuka ya sa yanke mafi laushi?
Hannun haƙora 44 (hagu) yana yanke sassauƙa kuma ana amfani dashi don datsa aikin kafinta da yin kabad. Hatsaniyar haɓakar hakora 24 (dama) tana yanke sauri kuma ana amfani da ita don aikin kafinta.
Shin karin hakora a kan ruwa da kyau ya fi kyau?
Yawan hakora a kan ruwa yana taimakawa ƙayyade saurin, nau'in da ƙarewar yanke. Blades da ƙananan hakora suna yanke da sauri, amma waɗanda ke da ƙarin hakora suna haifar da kyakkyawan ƙarewa. Gullets tsakanin hakora suna cire kwakwalwan kwamfuta daga sassan aikin.
Hakora nawa ne ya kamata rawanin rawanin rawanin ya gani?
80 hakori
Filaye-saw-saw-80 hakori.
Shin ruwan wukake na Diablo yana da ƙima?
Ijma'i shine cewa Diablo ya ga ruwan wukake yana daidaita inganci mai kyau tare da kyakkyawar ƙima, kuma zaɓi ne mai kyau lokacin maye gurbin ko haɓaka ruwan wukake na OEM waɗanda galibi ana haɗa su da sabbin saws. An yi amfani da waɗannan ruwan wukake kuma an gwada su tare da tsinken tebur na Dewalt DW745, da fili mai zamewa Makita LS1016L. mader saw.
Za a iya tsagewa da ruwan giciye?
Ana amfani da giciye na Crosscut lokacin yanke guntun hatsi, yayin da Ripping blade na dogon hatsi ne. Haɗin Hadin yana ba da damar mutum ya yanke duka giciye da tsagewa ta amfani da ruwa ɗaya.
Shin zaku iya amfani da kowane ruwa tare da SawStop?
Za'a iya amfani da kowane madaidaicin madaidaicin ƙarfe mai haƙoran ƙarfe ko carbide. Bai kamata ku yi amfani da ruwan wukake ko ruwan wukake tare da cibiya ko hakora ba (misali: lu'u-lu'u). Za su hana tsarin lafiyar SawStop yin amfani da siginar lantarki a kan ruwan da ake buƙata don jin taɓa fata.
Yaya kauri na ƙarfe zai iya yanke Sawzall?
Nasihu don yankan ƙarfe ta amfani da abin sawa.
Abubuwan da aka ba da shawarar don ƙarfe na bakin ciki sune waɗanda ke da hakora 20-24 a kowace inch, don matsakaicin kauri na ƙarfe tsakanin hakora 10-18 a kowace inch, kuma don ƙarfe mai kauri sosai ana bada shawarar ruwa mai kusan hakora 8 a kowace inch.
Shin Sawzall zai iya yanke ƙarfe mai tauri?
Carbide tipped Sawzall ruwan wukake na iya yanke karafa masu ƙarfi kamar ƙarfe boron, baƙin ƙarfe, ƙarfe mai ƙarfi da bakin karfe. Don haka yakamata a yi amfani da ruwan wukar Sawzall mai ƙyalli mai carbide tare da Sawzall don yanke ƙarfe mai tauri.
Ta yaya zan zabi ruwan wukake mai juyawa?
Adadin hakora a kowane inch yana ƙayyade saurin yankewa da rashin ƙarfi na yanke. Ƙananan ruwan TPI suna yanke sauri amma suna barin gefuna. Wuta a cikin kewayon 3 - 11 TPI yawanci sun fi kyau don aikin itace da rushewa. Yanke ruwan wukake yakan kasance a ƙananan ƙarshen, kuma rushewa / cin ƙusa yakan kasance a kusa da 8-11 TPI.
Menene adadin hakoran da ke kan mashin saw?
Yawan Hakora - Hakora nawa ne a cikin ruwa suke tantance matakin yanke shi. Ƙarin hakora yana nufin yankewa mai laushi, ƙarancin hakora yana nufin ruwa yana cire ƙarin abu.
Har yaushe ya kamata dillali ya ga ruwa ya daɗe?
tsakanin awa 12 da 120
Za su iya kasancewa tsakanin sa'o'i 12 zuwa 120 na ci gaba da amfani, dangane da ingancin ruwa da kayan da ake amfani da su don yankewa.
Shin tebur na gani da miter sun ga ruwan wukake iri ɗaya?
Haka ne, za ku iya. Duk da haka, tun da miter-saw ɗinku na bakin ciki ne, kuna iya buƙatar canza rabe-raben tablesaw. Idan mai rarrafe ya fi kauri, aikin za a kama shi kuma ba za ku iya ciyar da shi ba.
Shin TCT na iya yanke katako?
TCT (tungsten carbide-tipped) ruwan wukake ne mai sake kaifi madauwari saw ruwa. Abubuwan da ke biyowa za su iya amfani da tsintsiya na TCT: itace, wasu karafa na ƙarfe, karafa marasa ƙarfe, da robobi.
Q: Ga waɗanne injinan yankan sara za a iya amfani da ruwan wukake?
Amsa: A al'ada sara sara saw a zahiri da aka yi wa tsit abun yanka. Mai yankan tsit yana da ƙarin wurare a yankan fiye da na ɗawainiya. Don mai yankewa mai ɗaukuwa, ya kamata a sara raƙuman sara don samun damar yin amfani da šaukuwa abun yanka wanda yakamata yazo da bayanin samfurin.
Q: Yadda za a ƙara sara sara ruwan wukake a injin yankan?
Amsa: Sai kawai idan ramukan arbor sun cika makullan injin yankan, to, tsinken sara zai iya dacewa da kayan aikin yankan. Kawai cirewa kuma cika ruwan sara da sara da ƙulle kusoshi a kusa da shi kuma kuna shirye don tafiya.
Q: Shin madaurin carbide yana da kyau don yankan ƙarfe na abrasive?
Amsa: Don wuya ko abrasive karfe yanke carbide ruwan wukake ba da shawarar. Carbide ruwa yana da ƙananan ƙarfe. Aluminium oxide hatsin sara sara ruwan wukake ana ba da shawarar don yanke mai ƙarfi da ƙarfi.
Final Words
Kodayake, samfuran da aka bayyana a sama sune mafi ƙima, duk samfuran ba za a ɗauka su zama mafi kyau ga nau'in buƙatu ɗaya ba. Don haka, yakamata kuyi la’akari da mafi kyawun tsinken sara da kuke buƙata ko mafi dacewa da ku kafin zaɓar ɗaya. Don taimaka muku da shi a nan akwai wasu shawarwari a gare ku.
Idan za ku yi amfani da yau da kullun don amfanin yau da kullun na yau da kullun, ya kamata ku yi la'akari da Masana'antar Mercer 603020 Chop Saw Cut-Off Wheels. Kamar yadda wannan samfurin ya yi fice tare da RPM mafi girma da rayuwa kuma a matsayin ƙari wannan ƙaramin ƙaramin sara ne wanda ake amfani dashi don dalilai na gida. Wancan ya ce don haka idan injin ku na sara ba ya tsayawa, je zuwa DEWALT DW8001 Babban Makasudin Tsinke Ruwa.
Hakanan don yankan karafa masu taushi, DEWALT DW8500 14-Inch ta 1-Inch Diamond Edge Chop Saw Blade yana aiki sosai. Hakanan zaka iya zaɓar shi don mafi kyawun ƙarewar farfajiya. Wani zaɓi shine don yanke nauyi wanda ke nufin yanke karafa masu ƙarfi tare da sauƙi. Don wannan, je zuwa 14 x 1/8 x 1 T1 Chop Saw Blade Abrasive Cutting Wheel - 10 Pack kamar yadda yake da mafi ƙanƙanta.
Ni Joost Nusselder, wanda ya kafa Likitan Kayan aiki, mai tallan abun ciki, kuma uba. Ina son gwada sabbin kayan aiki, kuma tare da ƙungiyara Na ƙirƙira zurfafan labaran yanar gizo tun daga 2016 don taimakawa masu karatu masu aminci tare da kayan aiki & dabarun ƙira.
