Mafi kyawun Wuraren Da'ira Don Plywood

Shin kun san amincewar ku don cim ma aiki yana da alaƙa da daidaiton kayan aiki?

Ma'amala da plywood abu ne da aka saba gani a wurin bita na tunda yin majalisar ministoci ɗaya ne daga cikin abubuwan da na fi so.

Sau da yawa na yi amfani da ruwan wukake wanda ya zo da siya ta madauwari na farko. Yayi kyau a farkon amma daga karshe ya wargaza labarin mafarkina cikin dakiku.

Saboda haka, ba na fatan kowane mai sana'a ya fuskanci irin wannan rashin tausayi kuma ya daina yin sana'a. Wannan labarin ya shafi kawai mafi madauwari saw ruwa ga plywood kayayyakin samuwa a kasuwa.

Bari mu bincika su maimakon mu hakura kafin ma mu fara.

Top 5 Mafi kyawun Wuraren Da'ira don Plywood

Anan akwai ɗan tukwici ga novice hankali – plywood yana da saukin kamuwa da yage-fito. Don haka, yawan adadin hakora, mafi kyawun sakamako zai kasance.

1. PORTER+CABLE 4-1/2-inch madauwari Saw Blade, Plywood Yanke, 120-Hakora (12057)

(duba ƙarin hotuna)

Sau da yawa, sakamako masu ban mamaki suna ɓoye a bayan daidaitattun sunaye waɗanda muke kau da kai. Wannan shine dalilin da ya sa na ƙara PORTER+CABLE a saman jerin saboda wasan kwaikwayon ya cancanci irin wannan yabo.

How to strip wire fast

Share

Watch on

Karamin jiki ne mai inci 4½ wanda ya dace da shi sosai da yawa m madauwari saws. Har yanzu yana da kyau a duba dacewa kafin siyan shi akan layi. 120T tare da har zuwa 7500 RPM wani abu ne da yawancin ma'aikatan majalisar ke nema.

Kawai ka yi tunanin ruwan wukake mai sauri yana motsawa gaba don ciyarwa zuwa ga plywood, da aka ba da layin yanke. Hakoransa masu kaifi suna ba ka damar wuce iyaka da yanke katako, robobi na bakin ciki, da ƙari.

Muddin madauwari sawn ya ɗauki ramin arbor inch 3/8, ba za ku damu da kwanciyar hankali ba. Bayan haka, zaku iya yanke ƙarfin plywood daban-daban ba tare da wahala ba.

Yana da ƙari ga ƙwararrun ƙwararrun DIY waɗanda ke da alaƙa da kayan adon ciki da keɓancewar kere-kere. Ruwan zai nuna cikakken daidaito a cikin yanke don ƙira da aikace-aikace masu rikitarwa.

Kuma mafi kyawun sashi shine cewa da wuya ba za ku lura da wani lalacewa ba yayin aiki akan plywood. Dole ne ku kula da yuwuwar ƙonewar itace a wani wuri, kodayake.

Wannan ita ce kawai raunin ruwan da ke haifar da gajeriyar rayuwa mai kaifi. Don haka, kula da saurin gani lokacin aiki tare da wannan ɗan dabba.

ribobi 

• Yana ba da yanke mai kyau
• Yana kawar da tsaga
• Yana aiki lafiya
• Sauƙi da sauri tasiri akan kayan itace
• Manufa don hadadden kayan daki tare da plywood

fursunoni

• Ya kasa watsar da zafi lokaci-lokaci

hukunci

Me yasa za ku sami wannan samfurin idan ruwan ya bushe da sauri? Don masu farawa, ba da yawa 120T plywood ruwan wukake suna yin babban aiki tare da rage tsagewar hawaye.

Abu na biyu, dole ne ku yaba da ƙoƙarin da alamar ta yi tare da ingancin ginin. Gefen takardar da kyar ke buƙatar zaman smoothing karo na biyu!

A ƙarshe, kawai ku ba da shi kuma ku zama alkali da kanku. Har yanzu ina da wannan gem a ajiye kusa da sauran. Duba farashin da samuwa a nan

2. Freud 10 ″ x 80T Ultimate Plywood & Melamine Blade (LU80R010)

(duba ƙarin hotuna)

Ina da shakku game da ruwan Freud mai inci 10 don ɗaya daga cikin madauwari ruwan wukake a cikin kayana. Koyaya, Ni duk game da gwaje-gwaje ne kafin nadama.

Wasu lokuta, na yi tsayin daka game da wasu kayan aikin da alamar ta ke saboda sahihancin su. Duk da haka kasancewa mai kishi, na zaɓi 80T ruwa don yanke ta cikin ginshiƙan plywood da na tattara don ƙaramin aiki.

Dogon labari, Ina ƙauna da wannan samfurin duk da abin da wasu na iya yin sharhi game da ƙananan hakora. Ko da na yarda da hakora 80 tare da faffadan gullet bazai zama kyakkyawan zaɓi don melamine ko plywood ba.

Duk da haka, idan aikin ruwa ya wuce tsammanin ku, tabbas za ku ƙara amfani da shi! Don haka waɗanne siffofi ne suka sa ya zarce mafi yawan samfuran gasa?

Yana da ramummuka masu rage girgizar girgiza-laser wanda kuma ke kawar da motsi na gefe yayin aikin yanke. Don haka, rukunin da aka gina da kyau yana ƙara tsawon rayuwa ta atomatik yayin ba da ƙarewa mara lahani.

Mafi kyawun TiCo Hi-Density Carbide Crosscutting Blend yana tabbatar da mafi girman aiki, yayin da ATB ke niƙa yana kiyaye tsagewar. Yana da arbor 5/8-inch da kusurwar ƙugiya 2-digiri tare da cikakkiyar ma'aunin kerf.

Idan kana so ka guje wa ɓarna mai kyau na aikin da aka yi da igiya, zaɓi samfurin Freud. Bugu da ƙari, ya zo tare da sutura mara kyau don zama mai juriya da ja, lalata, da farar fata.

ribobi 

• Yana ba da gamawa mara guntu
• Ya dace da plywood veneered, melamine, da laminates
• Ƙananan girgiza da motsi na gefe
• Lalata da juriya
• Yana ba da matsakaicin saurin 7000RPM

fursunoni 

• Farashin m

hukunci

Idan ba ku yarda da ni ba, koyaushe kuna iya bincika waɗannan samfuran akan layi don nemo ra'ayoyin masu amfani na gaskiya. Ruwan ruwa kusan ba ya misaltuwa da makamantan raka'a. Komai yana shirye kuma yana fitar da ƙaramar hayaniya lokacin aiki tare da injin.

Ina daraja shi kamar lu'u-lu'u saboda kun duba farashin tukuna? Duba farashin anan

3. DEWALT 7-1/4 ″ Madauwari Saw Blade don Hollow Ground Plywood, 5/8 ″ da Diamond Knockout Arbor, 140-Tooth (DW3326)

(duba ƙarin hotuna)

DEWALT abu ne mai rikitarwa ikon kayan aiki alamar m, a ganina. Wasu kayan aikin suna da ingantacciyar inganci, yayin da wasu ba su da amfani sosai duk da injinin na ƙarshe.

Tambayar ita ce, ina wannan madauwari mai inci 7¼ ta tafi? Shin ya kamata ku samo shi don haƙoran ƙasa masu tamani ko ku matsa zuwa abu na gaba?

Za mu kai ga wannan batu, amma DEWALT na farko yana da la'akari koyaushe game da samun kayan aikin wuta da na'urorin haɗi a farashi mai araha. Wannan shine dalilin da ya sa na ƙara wannan abu ga masu sana'a waɗanda za su iya ganin ruwa Freud ya yi almubazzaranci.

Bugu da kari, adadin hakora, tare da ginin karfen masana'antu, suma suna taka rawa sosai wajen samar da shi sosai. Wannan yana nufin ba za a ƙara yin mu'amala da warping ko ɗaure ba.

Wadanda ke neman tsinken gani mai matsakaicin adadin hakora na iya dogara da wannan samfurin haɗe-haɗe na 140T don yanke santsi. Godiya ga suturar ruwa, an rage raguwa. Hakanan yana tsawaita rayuwar ruwa ta hanyar jure tsatsa.

Ƙarshen ƙwanƙwasa lu'u-lu'u 5/8-inch yana nuna dacewa gama gari tare da saws madauwari daban-daban. Kawai tabbatar da kiyaye kanku tare da yuwuwar adadin kariya kafin aiki.

Don haka daina dawdling a kan mummunan sake dubawa kuma gwada ruwa don koyon iyawarsa. Ba za ku ji kunya ba lokacin aiki akan fatunan plywood na ƙasa.

Bari in ba ku ƙaramin tip ɗin gudu don samun ƙonawa kyauta. Matsar da shi a hankali yayin yanke; zai kiyaye saurin sauri kuma ya hana shi fita daga hanya.

ribobi 

• Yana aiki sosai tare da siraran kayan plywood
• Hakora masu kaifi suna isar da yanke da sauri da santsi
• Tsatsa da juriya
• Tsarin jiki mai kauri don ingantacciyar karko
• Yana kawar da ɗaure da warps

fursunoni 

• Wahala tare da 3/4-inch plywood

hukunci

Yana da wani madaidaicin farashi madauwari saw ruwa wanda zai ci gaba da yanke da kyau don haka sai ku ci gaba da mikewa. Koyaya, Ina ba da shawarar zuwa ga ƙaramin haƙoran haɗe da ruwa idan kauri na panel ya wuce 5/8-inch. Duba farashin da samuwa a nan

4. Irwin 11820ZR 6-1/2-Inch 140 Haƙori na Filastik DFKM, Plywood, da Veneer Yankan Saw Blade tare da Arbor 5/8-inch

(duba ƙarin hotuna)

Anan akwai wata madauwari mai lamba 140T da Irwin ya gani wanda ya zo cikin diamita 6½-inch. Wannan shine ƙalubale na na farko lokacin da na kusa daina barin ƙofar gidan abinci.

Duk da haka, babu wata hanya ta sanin kayan aikin da suka dace sai dai idan wani ya yi amfani da su, daidai? Hakazalika, an tattara sakamakon a cikin nau'i na rips da yawa da kuma giciye da aka yi a kan bangarori na plywood.

Haƙoran ƙasa sune abin jan hankali na farko wanda ya sa ni sake gwadawa. Bari mu fatan zai ƙarfafa ku don ƙoƙarin yanke ƙira mai mahimmanci kuma.

Babu shakka, Irwin ya ga yankan ruwa yana ɗaya daga cikin mafi amintattun waɗanda ƙwararru da yawa suka ci karo da su. Hakanan shine madaidaicin naúrar don kowane zagi mara igiya, tsayin injin yana da saitin arbor 5/8-inch.

Ingantattun ruwan wukake tare da taurin farantin yana ba da gudu na gaskiya don ɗore fiye da yadda ake tsammani. A sakamakon haka, za ka iya aiki da ruwa a kan veneers, robobi, da dai sauransu, ban da plywood.

Yayin da robobi na HDPE kuma sun dace da yanke ta amfani da wannan ruwa, zan ba da shawarar saka idanu kan motsi da sauri don guje wa tasirin dusashewar sauri.

Haka kuma, yana da kerf 1/8-inch wanda ke ba da kyakkyawan aiki yayin da ake mu'amala da kayan plywood. Gabaɗaya, za ku so yadda mafi kyawun abin gani mai araha zai iya fitowa lokacin da ba a yi tsammani ba.

ribobi 

• Dace da mafi yawan igiya madauwari saws
• Daidai sosai lokacin aiki
• Samar da yanke-yanke-santsi
• Sakamakon raguwar tsagewar hawaye
• Sosai m tare da nauyi ma'auni high carbon karfe ginawa

fursunoni

• Yana buƙatar yanke ninki biyu don ¾ inch zanen gado na plywood

hukunci

Ya kamata ku samu? Shin ƙarancin farashi yana ba ku faɗakarwa mai arha a cikin kai? Na ce, manta da duk wannan kuma ku kama ɗaya daga cikin waɗannan da wuri-wuri.

Bayan haka, ƙwararrun masu koyo da masu amfani da DIY na iya yaba shi sosai waɗanda ba su da ƙarancin sani game da yankan tsinken katakon da ba shi da tsaga. Duba sabbin farashin anan

Samfuran Mafi Girma akan Kasuwa

Ko da ni ke da yancin bin manyan samfuran idan aka yi la'akari da mallakar mafi kyau. To amma wadanne ne ke yawo a kasuwa domin sun fi su?

BATSA

Yana kama da sarkin duk ƙwararrun kayan aikin wutar lantarki. Samfuran suna da yawa kuma ana iya ganin su a zahiri a duk wuraren gine-gine, wuraren masana'antu.

IRWIN

Idan DEWALT shine sarki, yi la'akari da IRWIN mai gasa mai mulki tare da suna. Har ila yau, hassada ce ta yawancin ƙananan kamfanoni na kayan aikin lantarki na duniya a cikin masana'antu.

Freud 

A'a, wannan ba game da Ostiriya neurologist a nan, amma daya daga cikin mafi kyau gani ruwa masana'antu kamfanoni a duniya. Hakanan yana ba da wasu ragowa da masu yankan kayan aikin wuta daban-daban.

Concord 

Samun amincewar mutane masu ingantattun kayan aikin, Concord Blades wata babbar masana'anta ce da ke kera nau'ikan ruwan wukake, rago, goge goge, da sauransu. Kamfanoni da yawa sun dogara da kayayyaki na Concord don kasuwancin su.

Tambayoyin da

1. Hakora nawa ya kamata ma'aunin gani mai madauwari don plywood ya samu?

Plywood siraren siraran itace ne na katako wanda aka manne tare tare da hatsi. Akwai halaye daban-daban na plywood, dangane da adadin yadudduka.

Don haka, adadin hakora kuma za su kewayo bisa ga kauri na panel. Ya kamata ku nemi ko da yaushe daga shirye-shiryen hakora 80 zuwa 140.

2. Me yasa duk madauwari saw ruwan wukake na plywood suna da hakora da yawa?

Yana hana hawaye da tsagewa, wanda ke sadar da sassauƙan yanke yayin da kuke sarrafa madauwari.

3. Shin tsagawa da tsaga a cikin plywood ba makawa? 

Kuna iya gwada rage su ta hanyar yin amfani da tef ɗin rufe fuska a ɓangarorin biyu na takardar, daidai kan layin yanke.

4. Sau nawa ya kamata ku kaifafa filayen plywood don zato mai madauwari?

Wannan ita ce kawai koma baya na madauwari ruwan wukake tare da hakora da yawa, musamman lokacin aiki tare da plywood. Suna yawan yin dusar ƙanƙara da sauri fiye da ruwan wukake na yau da kullun. Don haka ana buƙatar kaifi akai-akai.

5. Za a iya gyara tsagewar plywood? 

Hanyar da aka tabbatar ta haɗa da ƙara matsakaicin danko mai tushen ruwa filler itace zuwa yankin. Tabbatar share yankin daga tarkace da tarkace kafin aikace-aikace.

Hakanan, amfani da a putty wuka tare da matsakaicin matsa lamba lokacin cika gefuna. Yi watsi da duk abin da ya wuce kima kuma jira har sai ya taurare. Yanzu zaku iya yashi har ma da fitar da saman.

Final Words

Yanzu da na raba ra'ayina na kaina akan mafi kyau madauwari saw ruwa don plywood, lokacinku ne don zaɓar da haɓaka ƙwarewar ku.

Kawai tabbatar da samun wanda ya dace da aikinku da iyawar ku. Ba za a bar ku ba.

Don haka, kada ku daina kuma ku kasance lafiya a kusa da kayan aikin wutar lantarki!

Ni Joost Nusselder, wanda ya kafa Likitan Kayan aiki, mai tallan abun ciki, kuma uba. Ina son gwada sabbin kayan aiki, kuma tare da ƙungiyara Na ƙirƙira zurfafan labaran yanar gizo tun daga 2016 don taimakawa masu karatu masu aminci tare da kayan aiki & dabarun ƙira.