Mafi kyawun Tebu Saw Blades & an bayyana kowane nau'in

Ko da a matsayin mai sha'awar sha'awa ko kafinta na itace, kuna buƙatar yanke ta hanyar aikin ku don samun aikinku.

Tara ilimin daga gwaninta, a bayyane yake cewa ruwan wukake na lissafin tebur bai ga ƙarfin injin ba.

Ƙunƙarar ruwa mai ƙarfi na iya haɓaka a cikin matsala mai wahala yayin aiki. Amma ba ya ƙidaya ga kowane nau'in wuƙaƙƙun galan, saboda ba kowane kwarangwal ɗin da zai dace da aikinku ko injinku ko ƙaramin ƙarfin da ya fi aiki da shi.

Don haka maimakon neman na gargajiya da mafi kyawu, zaɓi waɗanda suka dace da aikinku da na'ura tare da kiyaye abubuwan al'ada da mafi kyawu.

Kuma duk mun san cewa yayin cin kasuwa za mu iya zama da sauƙin shawo kan nau'o'in zaɓuka na tebur gani ruwan wukake. Don haka mun harhada kayan gani na gargajiya da na saman tebur wanda za ku so ku duba.

Duk abin da kuka saya, kuna buƙatar bayanin bayani. Shi ya sa muka gayyace ku a nan. Don haka bari mu shiga cikin mafi kyawun kayan gani na tebur.

Jagorar siyan siyayyar tebur

Don yanke ta wani abu tare da na'ura ya dogara da bambance-bambancen da rigidity na ruwa.

Don samun m gama a kan workpiece kana bukatar ka sami wani abu musamman a zuciya, in ba haka ba, kana bukatar ka san abin da za ka iya bukata a cikin na'urar.

Idan kun kasance ɗaya daga cikin na baya, kuna maraba da ku. Domin lokacin da kuke kashe siyan samfura a kasuwa an bar ku da zaɓuɓɓuka da yawa waɗanda ke ruɗe ku.

How to strip wire fast

Share

Watch on

Amma kawai kuna son wanda ya dace da aikinku ko samun aikin ku da kyau da sauri.

Mu shiga!!

Countididdigar haƙori

Ƙididdigar haƙori abu ne mai girma a cikin siyan tsinken itacen tebur.

Kamar yadda ma'aunin ma'auni ya kasance na 40-80, inda mutane da yawa suka ɗauka cewa tare da adadi mai yawa na hakora ya zo da babban adadin samar da kayayyaki, amma ba daidai ba ne.

Domin zaku iya lura cewa yanke siyan ruwan yana ci karo da madaidaicin madaidaicin don haka adadin adadin haƙora bazai zama zaɓi mai hankali ba.

Nau'in saw

Kayayyakin da aka ƙera don ƙirar aikace-aikacen yawanci suna da haƙora kusan 25 ko ƙasa da haka, amma akwai ƴan ƙirar ƙira waɗanda aka tsara don yanke katako da samun haƙora 100 ko fiye.

Wannan saboda plywood ya fi rauni kuma ya fi sira fiye da kayan ƙira. Samun yawan adadin haƙora yana taimakawa yanke itacen da kyau ba tare da tsagewar plywood ba.

Ripping saw ruwa

Kamar yadda taken ya nuna, shine don yanke ta cikin mafi tsananin abu tare da ƙaramin adadin haƙori daga 25-40.

Don haka abin da kuke yankan lamari ne babba. Amma abin da zai iya tasiri shi ne cewa ba zai ba ku kyakkyawan gamawa ba ko kuma zai iya kashe saman.

Don haka idan kuna neman kawai don yanke ta kayan aiki masu wuya, kuna iya sake duba kayan ruwa Saw

Kayan hakora

Nau'in aikin ku da girman tebur ɗinku yana faɗin nau'in da ya fi dacewa da ku.

Don haka, idan kuna aiki tare da kowane nau'in aikin da zai buƙaci haɗin gwiwa, kuna buƙatar haƙoran haƙora 40- ko 50, amma kuna iya son a daidaita haƙoran a cikin tsarin da ake kira “Alternate Top Bevel with Raker, ” ko “ATBR” a takaice.

ATB, ko Alternate-Top Bevel, yana fasalta ƙananan hakora waɗanda ke madaidaicin mannewa zuwa dama da hagu, wanda ke haifar da yanke mafi girma tare da ƙarami, ƙananan hakora.

Wannan ruwa zaɓi ne mai hankali don ƙetare itace, yin haɗin gwiwa, sawing particleboard ko ma melamine.

Crosscut saw ruwan wukake

Wuraren tsintsiya na gani yawanci suna da kusan hakora 60 zuwa 80. Suna kuma da ƙuƙuman ƙuƙumma.

Ya bambanta da mayar da hankali kan gudu tare da ripping saw ruwan wukake, crosscut saw ruwan wukake an tsara tare da mafi girma daidaito da kuma maiko a zuciya.

Hakanan karanta - da mafi madauwari saw saw ruwan wukake, da mafi kyawun fale -falen buraka

Mafi Table Saw Blades An Yi nazari

Anan mun haɗa da mafi kyawun tebur gani ruwan wukake don farawa ku, tare da abubuwan da za su ja hankalin ku.

Waɗannan sun yi fice a cikin duk sauran don keɓancewar tsarin su. Mu duba.

1. Concord Blades WCB1000T080HP 10-Inch 80 Hakora TCT Janar Nufin Hard & Soft Wood Saw Blade.

Abin da ke sa ya yi fice

The Concord Blades WCB1000T080HP 10-Inch 80 Hakora TCT Wood Saw Blade ƙwararre ce kuma tana da faɗi sosai ga gefuna masu kaifi.

Wannan babban yankan itacen itace yana amfani da matakin gini don tsagewa & giciye na katako mai kauri har zuwa 3 1/2 ″ kauri da itace mai laushi har zuwa 1 inci kauri.

RPM (juyin juyi a minti daya) ya kai 5500 wanda shine babban matsayi. Wani tsari ne na al'ada wanda zai iya huda ta kowane katako, itace mai laushi, itace mai banƙyama, har ma da itace mai lalata.

Yana cire kowane irin tarkace bayan yanke. Siffar asali da abin da ba ta dace ba ita ce ƙarami amma kyakkyawa mai kaifi da kuma ci gaba da kaifi da ke ba ku yanke-kamar man shanu.

Wannan ma'aunin tebur yana ba ku ƙarancin ƙarewa a saman tare da taimakon ƙananan ƙugiya. Yana hana lalacewa mafi girma kuma yana ba da damar mafi ƙarancin sharar gida.

Yana ƙara matsa lamba abinci da ake buƙata. Yana da ƙirar kerf na bakin ciki 2.6 mm kuma yana da cikakkiyar niƙa tare da ƙugiya 15 digiri.

Wannan tebur saws ya dace da mashahurin Miter Saws, Sharuɗɗa, Teburin Gado, Zauren Hannu, da Yankan sara.

Me ya sa ba za ku sake dubawa ba

The Concord Blades WCB1000T080HP 10-Inch 80 Hakora TCT Wood Saw Blade an yi shi da wani abu mai inganci, amma duk da haka yana dushewa da amfani mai nauyi kuma yana buƙatar ƙarin ƙarfin waje don ya huda.

Wasu samfuran suna da saurin haɓakawa a cikin canjin girgiza yayin aiki.

Duba akan Amazon  

2. Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade tare da 5/8-Inch Arbor

Apple na ido

Forrest WW10407125 Woodworker II 10-inch 40 Haƙori ATB .125 Kerf Saw Blade tare da 5/8-inch Arbo ya zo tare da inganta kaifi da dogayen gefuna da ƙarin zagaye tare da sirara a gaba.

Yana da hannun sama a kan ƙarewa mai santsi tare da taimakon gefuna da aka yanke. Yana aiki tare da ingantacciyar hanyar hana sauti, kuma tsagewar baya a cikin plywood ba ta da kyau.

Bakin kerf saw yana adana 1/8 ″ akan asarar itace don kowane yanke. Tsarin kamar yadda kuka sani shine 15° ATB na salon hakori da ƙugiya 20°. An yi ruwan wukake da hannu.

An shimfiɗa tsinken tebur ta hanyar yin amfani da ƙarfi mai girma ta jiki tare da haƙoran carbide na C-4 masu kyau an yi su da hannu zuwa farantin, kuma ruwan wukake yana daidaitawa kuma an sake daidaita shi sau da yawa a cikin duka tsari.

An saita shi tare da ingantacciyar abu mai inganci wanda ke ƙara tsawon rayuwarsa kuma yana da nauyi mai nauyin kilo 2.18 don ba ku hanyar haɗin gwiwar mai amfani.

Yanke gefuna masu kaifi ba su da tsatsa. Yana samar da murabba'i, yankan ƙasa mai lebur don mahaɗin akwatin, splines, keyways, aljihunan aljihun aljihu da kowane wuri da kuke son yanke mai tsafta. 10 ″ x 40T, .125 ″ kerf, 5/8 ″ ramin arbor.

Wataƙila ba?

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade tare da 5/8-Inch Arbo yana daga cikin mafi kyawun sawun teburi, amma duk da haka haƙurin ramin Arbor yana da matsewa wani lokacin yana zama mai gajiya don cire ruwa daga kayan aikin ku.

Duba akan Amazon  

3. DEWALT DW3106P5 60-Yanke haƙora da 32-Babban Hakori Manufa 10-Inch Saw Blade Combo Pack.

Abin da zai fi jan hankalin ku

DEWALT DW3106P5 60-Yanke haƙora da 32-Tooth General Purpose 10-Inch Saw Blade Combo Pack ya zo da kyakkyawan ƙira na musamman tare da matsakaiciyar tazara tsakanin gefuna masu kaifi a jere waɗanda ke ba ku don magance aikin ku ta hanya mafi inganci.

An saita wannan ƙirar akan tsarin tsarin carbide tungsten wanda ke sa ya daɗe ko da bayan amfani mai nauyi. Don haka menene bambanci game da tungsten carbide?

An ce Tungsten ya fi nauyi sau 10 fiye da yawancin abubuwan da aka yi amfani da su a cikin injin tebur. Tungsten yana ba ku ƙarfi sau 4 fiye da abubuwan haɗin tebur na gargajiya.

Kuma ƙara ƙarin ƙarfinsa na al'ada ba zai lanƙwasa ba. Girman arbor shine 5/8 ". Tare da taimakon ma'auni na kwamfuta, yana rage girgiza kuma yana ba ku damar daidaito da daidaito a cikin aikinku.

Ya ƙunshi ruwan wukake 2, duka 10 ″ diamita, madaidaicin saman bevel, +ƙugin ƙugi na digiri 5, .071 ″ farantin, .097 ″ kerf. Harshen farko shine DW3103 (SKU 271.9524), wanda shine babban fa'ida wanda ke nuna hakora 32 don hanzarta da inganci ta hanyar yanke katako da katako.

Mu sake tunani

DEWALT DW3106P5 60-Yanke haƙora da 32-Tooth General Purpose 10-Inch Saw Blade Combo Pack ba tare da wani shakku ɗaya daga cikin mafi kyawun yanke yanke jiki ba, amma wani lokacin saboda nauyi da amfani mai ɗorewa, yana ɗaukar ɗan lokaci kaɗan don yanke ta hanyar.

Duba akan Amazon  

4. Diablo D1050X Haɗuwa Saw Blade

Fitattun fasaloli

Tare da kusan ƙirar ƙira amma bambance-bambancen fasali ya zo Diablo D1050X Haɗin Saw Blade tare da ƙarin tazara tsakanin gefuna.

Ana kera shi a Italiya.

Yana da 10x50T Diablo Blade.

Wannan samfurin ya haɗa da ƙarin fasahar zamani na yanke wanda shine Laser yanke stabilizer.

Yanzu, menene fa'idar irin wannan sabon tsarin? Yanke Laser yana kunna mafi girman kwanciyar hankali yayin aiki, kuma wannan tsarin ya haɗa da ƙarancin amfani da wutar lantarki da ƙarancin sharar gida ba tare da warping ko abrasion ba.

Yanke Laser yana taimaka muku ma'amala da yanki mai aiki kuma yana ba da madaidaicin madaidaici da madaidaicin madaidaici. Ramin faɗaɗa zafi na Laser-yanke yana ba da damar ruwa ya faɗaɗa saboda haɓaka zafi yana kiyaye yanke gaskiya da madaidaiciya.

TiCo™ Hi-Density carbide da aka yi amfani da ita a cikin wannan ƙirar an tsara shi musamman don kowane aikace-aikacen don haɓaka aiki don haɓaka aikin yanke ku.

Carbide da aka yi amfani da shi yana da ɗorewa mai ɗorewa na titanium carbide yana ba da ɗorewa mai ƙarfi, yanke-kaifi, da tsawon rai.

Kuma brazing mai juriyar girgiza-karfe yana ba da damar nasihun carbide don jure babban tasiri don matsakaicin tsayin daka.

Kwanan nan, Perma-SHIELD Non-stick Coating da aka kera a cikin wannan ƙirar yana kare shi daga zafi, gumming, & lalata.

Wataƙila ba?

Kamar yadda muka sani cewa Diablo D1050X Combination Saw Blade yana amfani da yanke laser. Yanke Laser ba tare da wata shakka ba yana ba ku yanke tsabta, amma yana buƙatar kuzari da yawa don ci gaba da kunna laser. Hakanan Laser yayin yanke yakamata ya zama isasshe, ba da yawa ba.

Duba akan Amazon  

5. Diabo ta Freud D1060X 10 ″ x 60 Hakkin Gini Mai Kyau Mai Kyau

Bari mu duba

The Diabo by Freud D1060X 10″ x 60 Haƙori Fine Gama Saw Blade shi ne manufa tebur gani ruwa ga datsa kafintoci barin wani santsi surface da ba bukatar kadan sanding.

Wannan ƙirar ƙirar ta ɗan yi kama da na baya tare da tsarin carbide.

Tico Hi-Density carbide wanda aka saita a cikin wannan ƙirar an tsara shi musamman don kowane aikace-aikacen don cimma ingantaccen aiki da haɓaka aikin yanke.

Diamita na wannan samfurin shine 1" kuma shine dace da miter saw da tebur saws. Hakora sun ƙunshi 6 HI-ATB.

Arbor yana da tsayi 5/8" da kerf na .098" tare da kusurwar ƙugiya kasancewa 15 digiri. Ƙaƙƙarfan gefuna na ruwa yana barin ma'aikatan datsa su sami mafi kyawun zamewa.

Ƙididdigan haƙorin sa yana da yawa idan aka kwatanta da samfuran da suka gabata kuma wannan yana taimakawa tare da ƙimar samarwa. Babban adadin haƙora yana ba da ƙarewa mai kama da man shanu tare da ƙarancin ƙazanta da warping yayin da ake rage kamawa ko busa.

Wannan ma'aunin tebur da aka yi a Italiya ya ƙunshi Perma-SHIELD Non-stick Rufaffen da ba na sanda ba yana karewa daga zafi, gumi, & lalata.

Jikin ƙarfe mai ƙarfi yana tabbatar da tsawon rai. Yana da manufa don ƙetare itacen oak, Pine, melamine, plywood, da gyare-gyare.

Ƙarfe mai juriya mai jujjuyawar brazing yana ba da damar tukwici na carbide don jure matsanancin tasiri don matsakaicin tsayi.

Kada mu yi sauri

An ce yana dusashewa bayan wani adadin amfani kuma bayan ɗan lokaci kaɗan yana barin kayan aikin ku ba daidai ba ko m.

Duba akan Amazon  

6. Makita A-93681 10-Inch 80 Tooth Micro Polished Miter ya ga Blade

Abin da zai iya jawo hankalin ku

Kiyaye kallon madauwari na gargajiya Makita A-93681 10-inch 80 Haƙori Micro goge baki Miter saw Blade ya fito da ingantattun gefuna masu kaifi.

Ana lissafta Carbide azaman ɗayan mafi ƙarfi a cikin ruwan wukake da ke riƙe kaifin sa akan wasu. Yana ba da kaifi da ƙarfi akan farantin karfe.

Domin abin da yake aiki a matsayin kayan aikin yankan mafi inganci. Kerf na bakin ciki na .091 ″ ne, kuma kusurwar ƙugiya tana da digiri 5, da kauri na faranti .071.

Don haka gefuna na carbide-tipped suna riƙe wannan ƙirar a matsayin manufa azaman kayan aikin yankewa. Kuma an girmama hakora na ciyawa tare da har zuwa 600 grit don madubi da man shanu-kamar gama.

Wannan ƙirar ƙira ce ta haɓakar ƙarfe da carbide tare da taurare faranti da ƙarfe don yanke gaskiya da gamsarwa. Diamita na ruwa na 10 inci ne, tare da ruwan ruwan Miter saw- Micro goge.

Yana ba da damar miter ko giciye. Yana ba da damar ɗan ƙaramin ja a ƙasa da ƙarancin asarar abu. Yana ba ku babban adadin haƙori na 80.

Hakanan yana ba da ƙimar samarwa mafi girma tare da RPM na 5,870.

Mu tabbatar !!

Kodayake wannan ƙirar tana nuna tsananin ƙarfi, duk da haka ba ya burge ku a cikin katako mai kauri tare da kammalawa da kama da man shanu. Hakanan kuma ruwan wukake yana fitar da babban hayaniya na iya zama batun tashin hankali.

Duba akan Amazon  

7. IRWIN Tools Classic Series Karfe Table / Miter Madauwari Saw ruwa, 10-Inch 180T (11870)

Yanzu abin da za ku iya samun mai daɗi

The IRWIN Tools Classic Series Karfe Table / Miter Circular Saw Blade, 10-Inch 180T (11870) ya inganta tare da ƙimar samarwa ta haɗa da ƙimar haƙora mai girma na 180 tare da tazara mai zurfi tsakanin kaifi da ƙarfi.

Yana da diamita na 10 "ko 254mm, da 5/8" arbor da 0.09 "kerf. Siffar madauwari shine don daidaito da daidaito mafi girma a cikin huda ta itace.

The saw ruwan wukake suna taurare don mafi girma rigidity da bayar da tsawaita karko da ingantattun ayyuka.

An saita ruwan wukake tare da ma'auni mai nauyi, babban carbon-karfe don ingantacciyar daidaito da ƙarewa mai santsi. Yana iya yanke ta hanyar TCG plywood, OSB, veneer, har ma da filastik.

Ma'aunin nauyi ya haɗa da ƙarin tashin hankali wanda ke ba da damar ƙarancin aiki ko matsa lamba. Madaidaicin haƙoran ƙasa don ƙarin daidaitattun yankewa da santsi don ba ku saman da ba a taɓa gani ba.

The high carbon karfe tsarin ba ka dadewa karko na gani ruwan wukake.

Me ya rage !!

Wannan ƙirar tana da matsala mai rikitarwa kamar ƙona ruwan wukake bayan dogon aiki da nauyi kuma yana dullus bayan babban wok. Yana ɗaukar wani ɗan lokaci zuwa yanke ta laminate.

Duba akan Amazon

Nau'in Teburin Gani Ruwa

Ba kowane ruwa ya dace da kowane nau'in nau'ikan kayan iri daban-daban ba. Kamar nau'in katako, girman, da yawa sun bambanta, ruwan wukake ya bambanta kuma ya fi dacewa da nau'ikan katako daban-daban.

Gilashin gani sun bambanta da juna a girman, niƙa, kauri, da adadin haƙora. Kowannensu ya dace da kewayon kayan aiki, don haka da gaske babu wani abu kamar ruwan gani na duniya. A cikin wannan labarin, za mu bi da ku ta hanyoyi daban-daban iri tebur saw ruwan wukake don fahimtar da ku game da ayyukan tebur saw.

Nau'in tebur ɗin da aka gani shine FTG (lebur saman niƙa), TCG (ƙarancin guntu sau uku), ATBR (haɗin), da ATB (madadin saman bevel).

Babban gefuna na hakora na FTG ruwan wukake suna da murabba'i zuwa farantin gani. Wadannan hakora, wanda kuma aka sani da rakers, suna kai hari ga itace kamar chisel yankan iyakar turmutsutsu.

Tsarin hakori na FTG an yi niyya ne don yankewa da rake kayan da kyau daga cikin kerf ɗin gani. Waɗannan haƙoran ba su da kaifi kamar yawancin bambance-bambancen ruwan wukake na FTG saboda babban kusurwar rake ɗinsu, wanda ke nufin a kore su ta hanyar yanke tare da babban ƙarfi.

Ana yin TCGs tare da rage jan haƙori, kwararar guntu kyauta, da daidaitaccen ƙarfin yanke. Chipping a cikin gaggautsa kayan kamar laminated particleboard, MDF da chipboard za a iya sauƙi kauce wa saboda wannan zane. Ana yawan amfani da geometry tip tip don yanke karafa marasa ƙarfe.

ATAFR, wanda aka fi sani da ATBR, nau'in ruwa ne wanda yawanci yana da maimaita haƙori 5. Hakora 4 na farko an ƙera ATB kuma na 5 mai salo ne na saman raker. Wannan tsari, musamman saboda hakoran lebur-top na 5, shine dalilin da ya sa ATBR ruwan wukake na iya barin shimfidar wuri mai santsi tare da kowane yanke.

Mahimmin niƙa na ATB yana da bevel daga sama, sashin haƙori na waje yana jujjuya zuwa kishiyar ruwan wuka, yana mai da shi “dukkan-manufa” niƙa. Yawancin lokaci ana amfani da wannan ruwa don yin ƙetare akan katako mai ƙarfi, gami da veneers, lattice, plywood, da sauransu.

Tare da tsari akai-akai wanda ke tafiya gabaɗaya ta hanyar ATB, jeri na bevel yana musanya tsakanin haƙori ɗaya da aka kafa hagu, kuma haƙori ɗaya ya kafa dama.

Siffofin Teburin Gani Ruwa

Wuraren gani na tebur sun zo da yawa iri-iri, kuma an ba su suna daban-daban saboda bambance-bambance a cikin fasali da ayyuka. Waɗannan su ne wasu daga cikin halayen da suka bambanta tsakanin ruwan tebur ɗin tebur:

size

Teburin gani na tebur na iya kama da iri ɗaya, amma sun bambanta a diamita da kauri don jure nau'ikan kayan aiki da aiwatar da nau'ikan yanke da yawa.

Za ku sami ruwan wukake na yau da kullun ya zama inci 10 a diamita, amma wannan na iya zuwa har zuwa inci 12 kuma, dangane da zurfin yanke da kayan.

hakora

Hakora a kan ruwa shine abin da ke fitar da siffar yanke. Yawancin hakora suna haifar da tsabta, santsi, da yanke mai kyau yayin da ƴan hakora masu yawa tare da raguwa mai yawa a tsakanin su daidai da yanke, wanda yake da kyau don tsagewa.

Hakanan, ƙananan adadin haƙoran na wuka ne, zai ɗauki tsawon lokaci don yin cikakken yanke guda ɗaya. Wannan saboda gullet yana buƙatar lokaci don ɗaga kayan a cikin tsari iri ɗaya yayin da ruwa mai haƙora da yawa ke yanke cikin sauri.

Juyin Juya Halin Minti (RPM)

Ana auna saurin ruwa a cikin RPM, wanda bai kamata ya wuce iyakar da aka bayyana ba. Tun da an yi ruwan wukake don juyawa a takamaiman gudun kuma ba zai iya wuce ta ba, yana iya lalata saman aikin ku idan an yi lodi.

A wannan yanayin, ruwa yana motsawa daga tsakiya, yana haifar da ƙarfin centrifugal. Wannan na iya haifar da kora yayin da zato ke motsi.

Nau'in Teburin Gani Ruwa

Kada ku damu, yawancin masu aikin katako suna da matsala ta banbance nau'ikan nau'ikan tsinken tebur daban-daban. A gaskiya ma, yawancinsu ba sa gwada sauran kayan gani har sai sun daɗe a cikin aikinsu. Don haka, kowane lokaci lokaci ne mai kyau don farawa.

Anan akwai nau'ikan tsinken tebur da ya kamata ku sani game da su:

Babban Manufar Ruwa

Masu kafinta waɗanda yawanci ke aiki da katakon katako da katako na amfani da irin wannan nau'in ruwa musamman akan itacen da ya kai tsayin inch 1. Babban manufa na gaba ɗaya yana da haƙora 40 tare da madadin haƙoran bevel masu digiri 30. Saboda wannan ƙira, ruwan wukake yana iya yin tsattsauran tsatsa da tsatsauran ra'ayi akan kowane nau'in itace mai ƙarfi.

Kowane ma'aikacin katako mai teburin zato yakamata ya sami wannan ruwan a cikin kayansu. Yana iya yanke kusan kowane irin itace. Tun da waɗannan ruwan wukake suna da ƙarancin haƙora fiye da haɗin haɗin gwiwa, suna iya tsaga itace da sauri. Hakanan suna ƙetare da kyau kuma ana iya amfani da su azaman madadin ruwan wukake da yawa.

Haɗin Blade

Dukan-manufa ruwan wukake da igiyoyin haɗin gwiwa suna da ayyuka iri ɗaya; sau da yawa, ana amfani da sharuddan su tare. Yawanci ana kiran ruwan wukake na asali na asali duka saboda an yi amfani da su don ƙetare da tsagewa kafin mafi yawan maƙasudin gani da yawa.

Ruwan ruwa yana da haƙora 50 tare da tsarin haƙoran ATBR, yana ba shi damar yin tsattsauran tsaga da tsatsaye cikin sauri. Ko da yake mafi yawan kafintoci da DIY woodworkers sun fi son 40 hakori ATB janar manufa ruwan wukake a zamanin yau, wadannan haduwa za a iya samu a da yawa woodshops ana amfani akai-akai.

Dukansu ruwan wukake na haɗuwa da ruwan wukake na gaba ɗaya na iya ƙwarar yanke ta nau'ikan katako da samfuran takarda. Salon ku ne kawai da abubuwan da kuke so na aikin itace suna da mahimmanci.

Tsage Ruwa

Ire-iren waɗannan nau'ikan tsinken tebur na iya bambanta duk da sunan gaba ɗaya. Kuna iya samun ruwan wukake masu tsayi inci 10 zuwa 12 a diamita tare da hakora 24 zuwa 30, amma duk abin da ke da mahimmanci shi ne yadda yake tsage itacen da kuka zaɓa.

Lokacin yage adadin alluna zuwa faɗi, ƙwararriyar tsage ruwa tana adana lokaci da aiki. Yawancin lokaci, yawancin sarari tsakanin hakora, ƙananan lokacin da ake ɗauka don tsaftace rikici. Wannan saboda ƴan haƙoran sun karkata ne ta hanyar da za ta kawar da tsattsauran tsattsauran ra'ayi don ƙarin yanke tsafta.

Koyaya, lokacin yage katako mai ƙarfi, ƙarin haƙora baya nufin yanke mafi kyau. Ƙarin hakora da gaske yana nufin cewa ruwa yana haifar da ƙarin zafi, wanda ke nufin dole ne ku yanke a hankali. Sakamakon haka, za a sami ƙarin alamun gani da konewa.

Tsage ruwan wukake yana da kyau don yankan ramummuka don kayan haɗin gwal na ƙaya saboda ƙirar haƙoran su masu lebur. Kyakkyawan tsage ruwa zai sami kowane haƙori mai faɗi wanda ke haifar da tsagi tare da lebur ƙasa, yana tabbatar da dacewa daidai a cikin fallen da aka fallasa.

Wannan yana sa ruwan wutsiya ya yanke da sauri tunda ƴan lambobi na haƙora suna rage zafi wanda ke ba da damar itace ta zame cikin sauƙi.

Crosscut Blade

Yanke itacen yana buƙatar yin amfani da ruwan wukake a ƙetaren itace da kuma a kan ƙwayar itacen, wanda zai iya haifar da tsagewa. Don yin yanke santsi da tsabta a wurin fita, ruwan yana da ƙarin hakora. Wannan shine dalilin da ya sa za ku lura cewa igiyoyin da aka yanke suna da haƙoran ATB 60 zuwa 100.

Haɗuwa da ruwan wukake na gaba ɗaya suma zaɓi ne masu kyau don ƙetare itace. Duk da haka, ƙidayar haƙoransu ya yi ƙasa da na ƙulle-ƙulle. Yayin da hakora 40 ATB na ruwan wukake na gabaɗaya da hakora 50 na haƙoran haɗin gwiwa na iya yin yanke tsafta, ba su yi kusan da kyau ba kamar yanke kan tsinken hakora 80 zuwa 100.

Tambayoyin da

Wane nau'i ne na tsinken tebur ke amfani da shi?

Babu ruwan wukake na duniya don tsinken tebur, amma akwai ruwan wukake da aka tsara a hankali don dacewa da wannan manufa. Maƙasudi na gaba ɗaya ko “dukkan-manufa” ruwan wukake na iya yin mafi yawan ayyukan tsagawa da ƙetare, amma ba a amfani da su ga kowane nau'in abu.

Duk da cewa ruwan wukake na gaba ɗaya na iya adana lokacin sauyawa tsakanin ruwan wukake, yana da kyau a sami ɗaya daga cikin kowane nau'in gani na asali, waɗanda sune ATB, ATBR, FTG, da TCG.

Menene bambanci tsakanin tsinken tebur da madauwari saw ruwa?

Table saws da madauwari saws bambanta kawai a cikin iya ɗauka. Yayin da ma'aunin madauwari mai haske, ƙarami, kuma abin hannu, sawayen tebur ɗin manya ne, injina masu nauyi waɗanda ke da wahala a ɗauka. Dangane da ruwan wukake, madauwari saws suna da ƙananan igiyoyi fiye da sawdukan tebur da ke da ƙarin bambancin.

Shin karin hakora a kan ruwa da kyau ya fi kyau?

A'a, ƙarin hakora a kan tsintsiya a fasaha ba yana nufin yana da kyau fiye da ruwa mai ƙananan haƙori ba, yana da kyau kawai don manufarsa. Wuraren da ke da ƙananan hakora suna da kyau don tsagewa, yayin da ruwan wukake masu hakora da yawa na iya yin zafi yayin da suke tsagewa ko a'a. Ƙananan hakora daidai gwargwado kuma mafi santsi.

Har yaushe za'a iya gani da wukake?

Dangane da ingancin ruwan wuka da nau'in kayan da kuke yankewa, igiyoyin gani za su iya jure ko'ina daga awanni 12 zuwa 120 na ci gaba da aiki.

Me yasa igiyoyin gani suka yanke a cikinsu?

Gilashin gani suna da ƙwanƙwasa ko “yanke” don yanke su da kyau tare da ƙwayar itacen. Mafi girman girman gullets daga juna, mafi girman yankewa, wanda ya dace da tsage itace.

Menene ruwan wuka ya sa yanke mafi laushi?

Hannun haƙora 44 (hagu) yana yanke sassauƙa kuma ana amfani dashi don datsa aikin kafinta da yin kabad. Hatsaniyar haɓakar hakora 24 (dama) tana yanke sauri kuma ana amfani da ita don aikin kafinta.

Ta yaya zan sani idan teburin da nake ganin ruwan yana da rauni?

Shin teburin inci 10 zai iya yanke 4 × 4?

Tabbataccen tebur na inci 10 ba zai iya yanke duk hanyar ta 4 × 4 a cikin wucewa ɗaya ba. Mafi zurfin yanke ramin inci 10 zai iya yanke shine kusan 3-⅛ inch. Tebur mai tsayi mai tsayi tare da ruwan inch 12 na iya yanke 4 × 4 a cikin wucewa ɗaya tare da matsakaicin yanke kusan inci 4.

Shin ruwan wukake na Diablo yana da ƙima?

Ijma'i shine cewa Diablo ya ga ruwan wukake yana daidaita inganci mai kyau tare da kyakkyawar ƙima, kuma zaɓi ne mai kyau lokacin maye gurbin ko haɓaka ruwan wukake na OEM waɗanda galibi ana haɗa su da sabbin saws. An yi amfani da waɗannan ruwan wukake kuma an gwada su tare da tsinken tebur na Dewalt DW745, da Makita LS1016L. zamiya fili miter saw.

Za a iya tsagewa da ruwan giciye?

Ana amfani da giciye na Crosscut lokacin yanke guntun hatsi, yayin da Ripping blade na dogon hatsi ne. Haɗin Hadin yana ba da damar mutum ya yanke duka giciye da tsagewa ta amfani da ruwa ɗaya.

Ta yaya zan zabi ruwan wuƙa?

Gabaɗaya, ruwan wukake tare da ƙarin hakora za su samar da sassauƙa, mafi kyau yayin da alluran da ƙananan hakora za su ba da yanke mai ƙarfi. Amfanin ƙananan hakora shine saurin yankewa da ƙaramin farashi. Don yawancin aikin gini, madaidaicin amfani da haƙora 24 ya isa.

Yaya tsawo ya kamata a ga teburin ruwa ya zama?

Ya kamata a ɗaga ruwa don haka ƙwanƙolin sa ya fi 1/8 ″ zuwa 3/8 ″ sama da kayan aikin ku. Yakamata a ɗaga ruwan don haka 1 cikakken haƙori ya bayyana sama da kayan aikin ku.

Wane teburin tebur zan saya?

Anan ne mafi kyawun saws na tebur da za ku iya saya: Mafi kyawun teburin gani gabaɗaya: DeWalt DWE7491RS 10-inch Tebur Saw. Mafi kyau table saw: SawStop PCS31230-TGP236 Majalisar Majalisar Saw. Mafi kyawun tebur mai tsayin nauyi: Bosch 4100-10 10-inch Worksite Tebur Saw.

Shin MDF yana da wuya akan ruwan wukake?

Particleboard, melamine, MDF, da hardboard duk kayan aiki ne masu ƙima waɗanda za su iya zama da wuya ga hakoran da aka gani. Yanke wannan kayan tare da ruwan ATB zai lalata nasihun sa masu sauri fiye da yawancin katako mai ƙarfi.

Har yaushe teburin da ke ganin ruwa ya ƙare?

Za su iya kasancewa tsakanin sa'o'i 12 zuwa 120 na ci gaba da amfani, dangane da ingancin ruwa da kayan da ake amfani da su don yankewa.

Shin yana da daraja a daidaita tebur ganin ruwan wukake?

Amsar ita ce eh, yana da daraja kaifi a madauwari saw ruwa. Gabaɗaya, ruwan wukake waɗanda farashin $50 ko sama da haka sun cancanci kaifi yayin da ya fi kyau a maye gurbin ruwan wukake masu rahusa. Sake ƙwanƙwasa ruwan wukake zai rage ɓata lokaci kuma zai cece ku kuɗi a cikin dogon lokaci musamman idan kuna amfani da ruwan carbide mai tsada.

Me kuke yi da tsofaffin wukake?

A wani lokaci, ruwan wukar wuyan ku zai buƙaci a kaifafa ko a fitar da shi. Kuma a, zaku iya kaifi wukake, ko a gida ko ta hanyar kai su ga ƙwararru. Amma kuma kuna iya sake sarrafa su idan ba ku son su. Tunda an yi su da karfe, duk wurin da ya sake sarrafa karfe ya kamata ya kai su.

Zan iya yanke 4 × 4 tare da mashin sara?

Hanya ɗaya don yanke 4 × 4 a cikin wucewa guda ɗaya shine ta daidaita mai tsaron ruwa don haɓaka ƙarfin yanke saws. Idan za ku iya ba da wuka ƙarin izini, to yakamata a sami damar yanke tsararre guda ɗaya ta hanyar post 4 × 4, koda lokacin amfani da ruwan inci 10.

Hakora nawa yakamata teburina ya gani da ruwa?

Ya dogara da kayan aikin ku, amma 80 ma'aunin ma'auni ne. Amma duk da haka, yanke shawara gwargwadon aikin ku da buƙatun ku.

Shin teburin inci 10 zai iya yanke 4 × 4?

Yawanci 10 "yana yanke 3X3 da ɗan zurfi, amma 12" yanke daidai girman 4X4, har yanzu kuna iya son duba kan takardar masana'anta

Yaya kauri ne ruwan tebur?

Babu iyaka ga saitin tsinken sawun, abin da ya fi dacewa da aikin ku shine kaurin ku. Amma kaurin gargajiya shine inch 1/8th.

Kammalawa

Akwai dalilai daban-daban da ya sa suke zama trendier fiye da duk sauran hanyoyin da ake samu a kasuwa, kamar yadda a cikin kayan haƙori, ƙididdigar haƙori, sifofin ruwa.

Muna son ku sami mafi kyawun ƙwarewa da ilimi daga gida zuwa shagon ku.

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade tare da 5/8-Inch Arbor an fi son shi saboda firam ɗin sa na hannu, wanda yake da ƙarfi sosai amma kuma yana fasalta ƙaramin kerf don yankewa sosai.

A gefe guda, Diabo na Freud D1060X 10 ″ x 60 Tooth Fine Finish Saw Blade zaɓi ne mai hankali don aikin sa na biyu azaman babban ruwa don tsagewa da yankewa, har ma da injin tsinke laser, kodayake ya ɓace a farkon wuri tunda ba shine mafi kyau a tsagewa ko yankewa ba, kodayake yana da kyau tare da duka biyun.

Muna fatan jagoranmu ya kai ga tsammaninku tare da ingantacciyar jagorarmu zuwa mafi kyawun kayan gani na tebur. Yanzu zaku iya gaggawar zuwa siyayya kamar yadda kuka san abin da kuke buƙata.

Sayayya barka da zuwa!!

Ni Joost Nusselder, wanda ya kafa Likitan Kayan aiki, mai tallan abun ciki, kuma uba. Ina son gwada sabbin kayan aiki, kuma tare da ƙungiyara Na ƙirƙira zurfafan labaran yanar gizo tun daga 2016 don taimakawa masu karatu masu aminci tare da kayan aiki & dabarun ƙira.